15 Problem Solving
528
Problem Solving
15
4 Push the center of the Cover B to close it gently.
5 If the Tray 6 is installed, put the Tray 6 back into position.
Paper Jams in Cover C
The following describes how to clear paper jams occurring in the Cover C.
1 If the Tray 6 (HCF) is installed, gently move
the Tray 6 to the left until it stops by gripping
the handle on the top left side of Tray 6.
2 Pull the release handle of Cover C, and open
the Cover C.
3 Remove the jammed paper.
Note • If paper is jammed at the upper position, it
may be invisible. Check inside
thoroughly.
• If paper is torn, check for any torn pieces
of paper inside the machine.
4 Push the center of the Cover C to close it gently.
5 If the Tray 6 is installed, put the Tray 6 back into position.
Paper Jams in Cover D (Duplex Module)
The following describes how to clear paper jams occurring in the Cover D.
1 Open the Tray 5 (Bypass).
To Next Page
Loading...