Stapler Faults
549
Problem Solving
15
6 Push the staple cartridge into the machine
until it clicks into place.
7 Close the finisher front cover.
Note • If the finisher front cover is not completely closed, a message will appear and the machine
remains paused.
If you cannot remove jammed staples even after you perform the above procedure,
contact our Customer Support Center.
Staple Jams in Staple Cartridge (for Finisher-B1)
The following describes how to clear staple jam occurred in staple cartridge of the
Finisher-B1 (optional).
1 Make sure that the machine is not operating,
and open the finisher front door.
2 Grasp the handle as shown in the illustration
to pull out the staple cartridge to the right,
towards you.
3 Move up the staple cartridge, and then pull it
out of the machine.
Note • The staple cartridge is firmly inserted. A
slight force is required to pull the cartridge
out of the finisher.
To Next Page
Loading...