PCL Emulation
601
Appendix
16
Symbol set 208 [0] (Default) : Roman 8
[1] : ISO 8859-1 Latin 1
[2] : ISO 8859-2 Latin 2
[3] : ISO 8859-9 Latin 5
[4] : ISO 8859-10 Latin 6
[5] : PC-8
[6] : PC-8 DN
[7] : PC-775
[8] : PC-850
[9] : PC-852
[10] : PC-1004 (OS/2)
[11] : PC Turkish
[12] : Windows 3.1 Latin 1
[13] : Windows 3.1 Latin 2
[14] : Windows 3.1 Latin 5
[15] : DeskTop
[16] : PS Text
[17] : MC Text
[18] : Microsoft Publishing
[19] : Math 8
[20] : PS Math
[21] : Pi Font
[22] : Legal
[23] : ISO 4 United Kingdom
[24] : ISO 6 ASCII
[25] : ISO 11 Swedish:names
[26] : ISO 15 Italian
[27] : ISO 17 Spanish
[28] : ISO 21 German
[29] : ISO 60 Norwegian v1
[30] : ISO 69 French
[31] : Windows 3.0 Latin 1
[32] : Windows Baltic
[33] : Symbol
[34] : Wingdings
[35] : UCS-2
Font size 209 Specifies the point size of a font in 25 increments. The value of 100 represents
1 point.
[400] - [5000] (Default: [1200]) : 4.00 to 50.00 point
Font pitch 210 Specifies the pitch size of a font. The value of 100 represents the pitch size of 1
point.
[600] - [2400] (Default: [1000]) : 6.00 to 24.00 point
Form line 211 Specifies the number of lines on a page.
[5] - [128] (Default: [64]) : 6.00 to 24.00 point
Quantity 212 Sets the number of copies to be printed.
[1] - [999] (Default: [1]) : 1 to 999 sets
Important • When the output quantity is specified by a client, that number of copies is
printed. After printing, the number set on the control panel is overwritten
with the number newly specified. However, the number of copies specified
from the NetWare or lpd port will not overwrite the number set on the control
panel.
Image enhance 213 Sets whether or not to enable the Image Enhancement feature.
Image Enhancement smoothens the border between black and white, reducing
rough edges, and thus seemingly increasing the resolution.
[0] : Off
[1] (Default) : On
HexDump 214 Sets whether to enable a hex dump.
[0] (Default) : Off
[1] : On
Draft mode 215 When printing in black and white, prints the portion printed in black by using the
draft mode. This feature is enabled for the entire document.
[0] (Default) : Off
[1] : On
Binding 217 Sets binding when printing 2 sided.
You can select [LEF] or [SEF] for 2 sided printing. Select according to the edge
to be bound. Unifies the leading direction of the image on the front and rear
sides of the paper at the long edge of the paper for LEF and at the short edge of
the paper for SEF.
[0] (Default) : LEF
[1] : SEF
Parameter
I
tem
No.
Value
To Next Page
Loading...
Need help?
General
