Notes and Restrictions
633
Appendix
16
z
When you use the Store & Send Link service by selecting [DocuWorks] and [Single
File for Each Page] for [File Format], you may not properly obtain files from the
destination URL if [Automatic prompting for file downloads] is set to [Disable] under
[Tools] > [Internet Options] > [Security] > [Custom Level] > [Automatic prompting for
file downloads] with your Internet Explorer.
z
When you use Internet Explorer, even if you click "To delete file, click here." in the
[Document Acquisition] screen of the Store & Send Link service, file deletion may not
be performed. In this case, use another browser than Internet Explorer to delete the
file.
îš„Split Files
You cannot select [Single File for Each Page] when using the Store to Folder or Job
Flow service.
îš„Thumbnail View
z
Files in a folder may not be displayed in thumbnail view in the following cases. In
those cases, display them in list view.
- Some file is not displayed in thumbnail view even though it is stored in the folder.
- Characters and images are not correctly displayed because they are scaled down
from the actual sizes.
z
The orientation of an image displayed in thumbnail view depends on which
orientation the document was stored in.
z
If the power is cut off immediately after a scanned file is stored in a folder, or if the
hard disk space is insufficient to display thumbnails, files in the folder may not be
displayed in thumbnail view. In that case, display them in list view.
îš„Store to WSD
z
When the WSD scan port is not activated, [Store to WSD] button is not displayed in
the [Services Home] screen. Enable the WSD scan port to use the Store to WSD
feature on the machine.
z
Store to WSD feature requires the scanner driver included as standard in Windows
Vista Service Pack 2 or later. When an appropriate operation system is installed, you
can operate scan using [Windows Fax and Scan] or [From scanner or camera] in
[Microsoft Paint].
z
[Next Original] is not displayed when using WSD scan.
z
You cannot execute multiple jobs simultaneously. If you execute a job during the
scan job, the latter job is not accepted.
z
When using WSD scan, you cannot change layout settings by the machine.
Configure the settings on the computer using the scanner driver included as
standard in Windows.
z
Press [Operate From Computer] to display the standby screen. If the standby screen
is not displayed, a scan job will not be started even when the network computer
recognizes the machine. While the standby screen is displayed, the machine does
not execute Auto Clear or enter the Energy Saver mode.
z
After being scanned, remove the originals and then press [OK] on the [Remove Your
Originals] screen. You cannot execute any operation without pressing [OK].
z
Store to WSD feature requires the scanner driver included as standard in Windows
Vista or later. Setting items are different from those for the dedicated scanner driver.
To Next Page
Loading...
Need help?
General
