z
The items displayed vary depending on the printer language.
Retrieve Programming
You can retrieve and use settings registered in memory.
1
Select [Retrieve Programming].
2
Select the memory number to use.
Factory Defaults
You can use the factory default settings.
Custom Settings
Displays the numbers stored in the memory.
Programming
You can check or change the value set for the print mode item number.
z
For the item numbers that can be configured in each mode menu, refer to "ESC/P-K Emulation Settings" (P.640), "PDF Direct Print
Settings" (P.657), "PCL Emulation Settings" (P.663) and "HP-GL/2 Emulation Settings" (P.670).
1
Select [Programming].
2
Enter the item number of the feature to set in [Item Number] with the numeric keypad.
To Next Page
Loading...
