Appendix
640
Appendix
16
Output Feature
This section describes the machine's output feature.
Outputting a Pending Print Job
The printing of jobs already received by the machine can be prioritized over other jobs.
z
For information on prioritizing the printing of jobs already received by the machine, refer to "Job Status" > "Printing Pending Jobs"
in the User Guide.
ESC/P-K Emulation Print Features
Pages per Side
The Pages per Side feature reduces the size of multiple-sheet documents and prints them
on a single sheet of paper.
The Pages per Side feature can be used in the ESC/P-K emulation mode. In the ESC/P-K
mode, 2 Up can be used.
Form Overlay
In the ESC/P-K mode, you can register an original form on the machine, and overprint the
form on a printout.
The form to be used for overlaying can be specified on the control panel.
z
For more information on registering forms, contact our Customer Support Center.
Forms
You can use ESC/P-K to register forms on the machine. Up to 64 forms can be registered.
z
For more information on registering forms, contact our Customer Support Center.
ESC/P-K Emulation Settings
The following tables show the basic and extended settings that can be configured onthe
ESC/P-K emulation mode menu.
Basic Settings
The following tables show the basic and extended settings that can be configured onthe
ESC/P-K emulation mode menu.
To Next Page
Loading...
