ESC/P-K Emulation
641
Appendix
16
Setting Item Item
Number
Value
Paper tray 3 Sets the paper tray to be used for printing.
[0]: Auto
[1] (Default): Tray 1
[2]: Tray 2
[3]: Tray 3
[4]: Tray 4
[5]: Tray 5
If printing from Tray 5, instruct printing and then operate the machine to
start printing. To cancel the setting, change the setting for "Tray
5Confirmation".
z
When Trays 1 to 4 is selected, the paper size is determined by the size of paper
loaded in the tray, and thus [Paper Size] cannot be set.
z
When [Auto] is selected and paper of the same size in the same orientation is
loaded in multiple trays, paper will be fed in the order of Tray 1 J Tray 2 J Tray 3
J Tray 4. If paper of the same size is loaded in multiple trays but in different
orientations, feeding of the paper loaded in the landscape orientation is prioritized.
Document size 1 Sets the client-created document size.
[99?(Default):Paper
[100]: Continuous form paper(10X12)
[101]: Continuous form paper(10X11)
[102]: Continuous form paper(15X12)
[103]: Continuous form paper(15X11)
[3]: A3
[4]: A4
[5]: A5
[14]: B4
[15]: B5
[21]: 8.5X14
[22]: 8.5X13
[23]: 8.5X11
[24]: 11X17
[0]: Postcard
The number of characters printed is: 80 characters/72 rows for continuous
form paper (10 x 12), 80 characters/66 rows for continuous form paper (10 x
11), 136 characters/72 rows for continuous form paper (15 x 12), and 136
characters/66 rows for continuous form paper (15 x 11).
z
When a continuous form paper is selected for [Original Size], [Paper Position]
cannot be set.
z
When [Preset%] or [Fit to Cut Sheet] is selected for [Reduce/Enlarge], the machine
automatically calculates the magnification based on a combination of [Original
Size] and [Paper Size]. If the ratio, however, is outside the range of 45-210%, the
document will not be reduced/ enlarged, and will be printed at a scale of 100%.
When [2 Up] is selected, the machine automatically calculates the magnification
based on a combination of [Original Size] and 1/2 of [Paper Size].
z
The orientation set here is that of the document. It is not affected by the
orientation of paper loaded in the paper trays.
Orientation 19 Sets the orientation of paper.
[0] (Default): Portrait
[1]: Landscape
To Next Page
Loading...
Need help?
General
