Installation Procedures
381
Using the Internet Fax Service
11
3) Select [S/MIME Settings], and then set the items.
z
For more information on how to configure S/MIME settings, refer to S/MIME Settings(P.198).
8
Select [Close] repeatedly until the [Tools] screen is displayed.
9
Select [Close].
z
Rebooting the machine may be required depending on the settings. When a message displayed on the
screen, follow the message and reboot the machine.
10
After the machine reboots, you can print a configuration report to confirm the settings of
each item.
z
For information on how to print a configuration report, refer to "Print Reports" (P.95)".
Step 3 Testing the Internet Fax
Test the Internet fax transmission from the machine.
1
Select [Fax/Internet Fax] on the Services Home screen to display the [Fax/Internet Fax]
screen.
2
Select [Internet Fax] from the drop-down menu.
3
Enter a destination address.
4
Press the <Start> button to transmit.
5
Check whether the computer received the e-mail.
z
If the computer cannot receive the e-mail, refer to "Problem Solving" (P.439).
To Next Page
Loading...
