Passcode Setting for Extended Functions
721
Appendix
16
Passcode Setting for Extended Functions
A passcode is required to use the extended function on the machine.
Available Extended Function and Passcode
z
It takes a few minutes longer to warm-up the machine after you set the passcode to enable the extended
function.
Following are instructions for enabling the extended function.
1
Press the <Log In/Out> button on the control panel.
2
Enter the System Administrator’s user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
z
When a passcode is required, select [Next] and enter the System Administrator’s passcode.
3
Select [Tools] on the Services Home screen.
4
Select [Maintenance] in [Common Service Settings] under [System Settings].
Extended Function Passcode
Extensible Customization Function/custom service MCQENEIWSRQS@
To Next Page
Loading...
Need help?
General
