Setup
269
Tools
5
Resend Interval
Set the transmission retry interval from 30 to 300 seconds.
Name, Server, Shared Name, Save in, User Name, and Password
Select [Name], [Server], [Shared Name], [Save in], [User Name], or [Password] to display an
input screen.
The numbers of characters you can input are as follows:
z
Name: Up to 18 single-byte characters
z
Server: Up to 64 single-byte characters
z
Shared Name: Up to 64 single-byte characters
z
Save in: Up to 128 single-byte characters
z
User Name: For domain users: up to 97 characters with the format of “user
name@domain name” or “domain name\user name” (user name and domain name
must be up to 32 and 64 single-byte characters respectively) For local users: up to 32
single-byte characters
z
Password: Up to 32 single-byte characters
Print
Configure print settings. When [On] is selected, you can configure the settings for the Print
feature.
Print Quantity
Set the number of copy sets from 1 to 999 in 1 set increments.
Paper Supply
Select a paper tray for printing. When [Auto Select] is selected, the same paper size as the
document size is used.
Auto Select
A suitable paper tray is automatically selected.
Trays 1 to 4
Select paper from four trays.
Bypass
Prints on paper loaded in Tray 5.
2 Sided Printing
Set the 2 sided printing option.
Output
Configure the stapling, hole punch, and output destination settings.
Staple
Set the position for stapling.
Hole Punch
Set the position for punching.
Output Destination
Set the output destination.
To Next Page
Loading...
Need help?
General
