Copying Procedure
101
Copy
3
3 If the previous settings still remain, press the
<Clear All> button.
4 Select each tab, and configure features as
necessary.
The following shows the reference section for each tab.
"Copy" (P.112)
"Image Quality" (P.125)
"Layout Adjustment" (P.132)
"Output Format" (P.146)
"Job Assembly" (P.179)
Step 3 Entering a Quantity
1
Enter the number of copies using the numeric
keypad.
The number of copies entered appears on the
upper right of the touch screen.
Note • You can enter up to 9999 sets.
• If you have entered an incorrect value, press
the <C (Clear)> button and then enter the
correct value.
To Next Page
Loading...
Need help?
General
