EasyManuals Logo
Home>Fuji Xerox>All in One Printer>DocuCentre-V C7785

Fuji Xerox DocuCentre-V C7785 User Manual

Fuji Xerox DocuCentre-V C7785
493 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
2 Product Overview
78
Product Overview
2
Switch the power off at the end of the day or when not using the machine for an extended
period of time.
Use also the Power Saver feature to save power consumption while the machine is not in use.
For information on the Power Saver feature, refer to "Power Saver Mode" (P.82).
Important If the power is switched off, all the services of the machine will stop. When using the machine
throughout the day for jobs such as receiving fax, do not switch the power off.
1 Press the power switch to switch the power on.
Note The “Please wait...” message indicates that
the machine is warming up. The machine is
not available during warming up.
If the machine is not powered on, check the
following:
- The power cord is plugged in.
- The main power is switched on.
- The ground fault interrupter is in the
depressed position.
Switching the Power Off
Important If the power is switched off, all the services of the machine will stop. When using the machine
throughout the day for jobs such as receiving fax, do not switch the power off.
Note You can set the machine to be switched off automatically at the same time every day. For more
information, refer to "5 Tools" > "Common Service Settings" > "Power Saver Settings" >"Scheduled
Power Off" in the Administrator Guide.
1 Before switching the power off, make sure that the machine has completed all copy or print
jobs. Then, make sure that the <Data> indicator is not blinking.
Important Do not switch the power off in the following situations. If the power is switched off, the processing
data may be erased.
- While data is being received
- While a job is being printed
- While a job is being copied
- While a job is being scanned
When switching the power off, wait 5 seconds after outputs have been delivered.
2 Press the power switch.
Important Power off processing is performed internally
on the machine for a while after the power is
switched off. Therefore, do not switch the
main power off immediately after switching
the power off.
<TEST> button
Ground fault
interrupter

Table of Contents

Other manuals for Fuji Xerox DocuCentre-V C7785

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-V C7785 and is the answer not in the manual?

Fuji Xerox DocuCentre-V C7785 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-V C7785
CategoryAll in One Printer
LanguageEnglish

Related product manuals