Power Source
79
Product Overview
2
Switching the Main Power Off
Important • Do not switch the main power off while the touch screen displays a screen or the <Power Saver>
button blinks. Switching off the main power may damage the hard disk and the memory or cause a
machine malfunction.
• Switch the main power off first when unplugging the power cord. Unplugging the power cord with
the main power on may damage the hard disk and the memory or cause a machine malfunction.
1 Make sure that the power is switched off.
2 Make sure that the touch screen is blank and the <Power Saver> button does not light up.
3 Open the machine front door.
4 Press the main power switch to the [ ]
position to switch the main power off.
The <Main Power> indicator goes out on the
control panel.
5 Close the machine front door.
Switching the Power Off from Remote Location
The following describes how to switch the power off from remote location.
Note • A user ID and passcode are required to switch the power off. Ask your system administrator for the
user ID and passcode.
1 From your computer, access to CentreWare Internet Services.
For information on how to access to CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.476).
2 Click [Power Off].
Note • If there are any jobs in process, the
request for powering off the
machine will not be processed.
To Next Page
Loading...
Need help?
General
