166 Using the Operator Panel Menus
• Output Color
Purpose:
To specify the color mode to Color or Black and White. This setting is used for a print job that does not specify a print
mode.
Values:
• Ignore FormFeed
Purpose:
To specify whether to ignore blank pages that only contain Form Feed control codes.
Values:
PDF Settings
Use the PDF Settings menu to change printer settings that only affect the PDF jobs.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Quantity
Purpose:
To specify the number of copies to print.
Values:
• 2-Sided Print
Purpose:
To specify whether to print on both sides of a sheet of paper.
Values:
• Print Mode
Purpose:
To specify the print mode.
Values:
Black and White
*
Prints in the black and white mode.
Color Prints in the color mode.
Off
*
Disables the Ignore FormFeed feature.
On Enables the Ignore FormFeed feature.
1 sets
*
Sets the value in increments of 1.
1–999
1-Sided
*
Does not print on both sides of a sheet of paper.
Long Edge Flip Prints on both sides of a sheet of paper to be bound by long edge.
Short Edge Flip Prints on both sides of a sheet of paper to be bound by short edge.
Normal
*
For documents with normal sized characters.
High Quality For documents with small characters or thin lines, or documents printed using a dot-matrix
printer.
High Speed Prints with the higher speed than the Normal mode, but the quality is less.
To Next Page
Loading...
