Using the Operator Panel Menus 185
Secure Settings
Use the Secure Settings menu to set a password to limit access to the menus. This prevents items from being
changed accidentally.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Panel Lock
Purpose:
To set a limited access to Admin Menu with a password, and to set or change the password.
See also:
• "Panel Lock Function" on page 192
Values:
*1
This item is available only when Panel Lock Set is set to Enable.
• Data Encryption
Purpose:
To disable or enable data encryption when using the printer.
Values:
• HDD Over Write
NOTE:
• HDD Over Write feature is available only when the hard disk unit is installed.
• Overwrite of the hard disk may take several hours. When overwriting the hard disk, all functions of the printer are inoperable.
Purpose:
To erase the contents of the entire hard disk unit by overwriting the hard disk unit with meaningless data.
Values:
Panel Lock Set Disable
*
Disables password protection for Admin Menu.
Enable Enables password protection for Admin Menu.
Change Password
*1
0000–9999 Sets or changes the password required to access Admin Menu.
Encryption Off
*
Disables encryption of the data.
On Enables encryption of the data.
Off
*
Disables overwrite of the hard disk unit.
1 Time Overwrites the hard disk unit once.
3 Times Overwrites the hard disk unit three times.
To Next Page
Loading...
