230 Troubleshooting
Noise
Problem Action
The printed result has the noise. To specify the cause of the noise, perform the Auto Registration.
If the problem is solved, replace the 2nd BTR, the belt unit, and the retard roller.
If the problem persists, replace the fusing unit.
Replace the 2nd BTR, the belt unit, and the retard roller.
See also:
• "Replacing the Belt Unit, the 2nd BTR, and the Retard Roller" on page 265
If the problem persists, replace the waste toner box.
Replace the fusing unit.
See also:
• "Replacing the Fusing Unit" on page 262
If the problem persists, replace the black toner cartridge.
Replace the waste toner box.
See also:
• "Replacing the Waste Toner Box" on page 274
If the problem persists, replace the drum cartridges.
Replace the drum cartridges.
See also:
• "Replacing the Drum Cartridges" on page 256
• "Installing the Drum Cartridges" on page 259
If the problem persists, replace the black toner cartridge.
Replace the black toner cartridge.
See also:
• "Replacing the Toner Cartridges" on page 253
If the problem persists, replace the yellow toner cartridge.
Replace the yellow toner cartridge.
See also:
• "Replacing the Toner Cartridges" on page 253
If the problem persists, replace the magenta toner cartridge.
Replace the magenta toner cartridge.
See also:
• "Replacing the Toner Cartridges" on page 253
If the problem persists, replace the cyan toner cartridge.
Replace the cyan toner cartridge.
See also:
• "Replacing the Toner Cartridges" on page 253
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
To Next Page
Loading...
