74 Printer Connection and Software Installation
Changing the Firewall Settings Before Installing Your Printer
If you are running one of the following operating systems, you must change the firewall settings before installing the
Fuji Xerox printer software:
• Windows 7
• Windows Vista
®
• Windows Server
®
2008 R2
• Windows Server 2008
• Windows XP
NOTE:
• For Windows XP, Service Pack 2 or 3 must be installed.
The following procedure uses Windows 7 as an example.
1 Insert the Driver CD Kit into your computer.
2 Click Start → Control Panel.
3 Click System and Security.
4 Click Windows Firewall.
5 Click Allow a program or feature through Windows Firewall.
6 Click Change settings.
7 Click Allow another program.
8 Click Browse.
9 Click D:\setup.exe (where D is the drive letter of the optical drive) in the File name text box, and then click
Open.
10 Click Add.
11 Click OK.
To Next Page
Loading...
Need help?
General
