168 Using the Operator Panel Menus
PS Settings
Use the PS Settings menu to change printer settings that only affect jobs using the PostScript
®
emulation printer
language.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• PS Error Report
Purpose:
To specify whether to print the contents of PostScript errors.
The change becomes effective after the printer is turned off and then on again.
Values:
NOTE:
• Instructions from the PS driver override the settings specified on the operator panel.
• PS Job Time-out
Purpose:
To specify the runtime of one PostScript job.The change becomes effective after the printer is turned off and then on
again.
Values:
• Paper Select Mode
Purpose:
To set the way to select the paper tray for PostScript mode.The change becomes effective after the printer is turned
off and then on again.
Values:
• Output Color
Purpose:
To specify the color mode to Color or Black and White. This setting is used for a print job which does not specify a
print mode.
Values:
Off Discards the print job without printing an error message.
On* Prints an error message before it discards the job.
Off* Job time-out does not occur.
On 1 min A PostScript error occurs if processing is not completed after the specified
time.
1-900 min
Auto* The tray is selected as the same setting as in the PCL mode.
Select FromTray The tray is selected in a method compatible with regular PostScript printers.
Color* Prints in color mode.
Black and White Prints in black and white mode.
To Next Page
Loading...
