Troubleshooting 239
016-923 Press the button, or wait for the time set in Fault Time-out for the printer to recover. Modify the
setting of WEP key or WPA pass phrase.
016-930 The device is not supported. Remove it from the USB port.
016-931 The USB hub is not supported. Remove it from the USB port.
016-982 Press the button, or wait for the time set in Fault Time-out for the printer to recover.
042-700 Wait for a while until the printer cools down.
077-215 Turn off the printer. Confirm that the duplexer is correctly installed, and turn on the printer. Contact
customer support if this failure is repeated.
093-925 Turn off the printer. Confirm the black toner cartridge is correctly installed, and turn on the printer.
093-950 Turn off the printer. Confirm the yellow toner cartridge is correctly installed, and turn on the printer.
093-951 Turn off the printer. Confirm the magenta toner cartridge is correctly installed, and turn on the printer.
093-952 Turn off the printer. Confirm the cyan toner cartridge is correctly installed, and turn on the printer.
116-316 Turn off the printer. Remove the optional 512MB memory from the slot, and then reattach it firmly. Turn
on the printer. Contact customer support if this failure is repeated.
116-317 Turn off the printer, and turn it on again. Contact customer support if this failure is repeated.
116-320 Remove the unsupported additional memory module. Contact customer support if this failure is
repeated.
116-721 Press the button, or wait for the time set in Fault Time-out for the printer to recover.
116-722
To Next Page
Loading...
Need help?
General
