Basic Operation 37
7 Close the control board cover, and slide it towards the front of the printer.
8 Turn the screw clockwise.
9 Turn on the printer.
10 Print the Printer Settings page to confirm that the newly installed memory module is detected by the printer.
a Press the (Menu) button.
b Select Report / List, and then press the button.
c Select Printer Settings, and then press the button.
The Printer Settings page is printed.
11 Confirm the amount of Memory Capacity listed under General in the Printer Settings page.
If the memory capacity has not increased, turn off the printer, unplug the power cord, and re-install the memory
module.
12 If you installed the optional 512MB memory after installing the print driver, update your driver by following the
instructions for the operating system you are using. If the printer is on a network, update the driver for each
client.
To Next Page
Loading...
Need help?
General
