Basic Operation 51
5 Insert the two plastic pins on the hard disk unit into the metal casing holes.
6 Attaching the protrusion and the connector to the control board, push the hard disk unit firmly into place.
7 Close the control board cover, and then slide it towards the front of the printer.
8 Turn the screw clockwise.
9 Turn on the printer.
10 Print the Printer Settings page to confirm the optional hard disk unit is installed correctly.
a Press the (Menu) button.
b Select Report / List, and then press the button.
c Select Printer Settings, and then press the button.
The Printer Settings page is printed.
To Next Page
Loading...
