[ 3 ] Repair period after production stop, spare parts supply period (holding period)
Concerning models (products) which have gone out of production, this company will perform
repairs for a period of 7 years after production stop, counting from the month and year when the
production stop occurs. In addition, we will continue to supply the spare parts required for repairs
for a period of 7 years, counting from the month and year when the production stop occurs.
However, if it is estimated that the life cycle of certain electronic and other parts is short and it
will be difficult to procure or produce those parts, th
ere may be cases where it is difficult to
provide repairs or supply spare parts even within this 7-year period. For details, please confirm
at our company's business office or our service office.
[ 4 ] Transfer rights
In the case of standard products which do not include settings or adjustments in an
application program, the products shall be transported to and transferred to the customer and
this company shall not be responsible for local adjustments or trial operation.
[ 5 ] Service contents
The cost of purchased and delivered products does not include the cost of dispatching engineers
or service costs. Depending on the request, these can be discussed separately.
[ 6 ] Applicable scope of service
Above contents shall be assumed to apply to transactions and use of the country where you
purchased the products.
Consult the local supplier or Fuji Electric Co., Ltd. for the detail separately.
To prevent the risk of hazardous accidents that could be caused by damage of the inverter,
install the specified MCCB in the supply side (primary side) according to the following tables.
- Breaking capacity: Min. 10 kA
- Rated voltage: Min. 500 V
To Next Page
Loading...
