Getting started
Setting u p the device
VideoworkstationErgonomicDevice,
When setting u p your device, please rea d the recommendations and
safety notes in the "Safety/regulations" manual.
We recommend that you place your device on a surface with good anti-slip qualities.
In view of the multitude of different finishes and varnishes used on furniture, it is
possible that the rubber feet will m a rk the surface they stand on.
Depending on your device location, disturbing vibrations and noises may occur. In
order to avoid this, a minimum distance of 10 mm / 0.39 inch to other devices or
objects should be maintained on housing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
on the monitor or the device.
For ventilation surfaces, a minimum distance of 200 mm / 7.87 inch
from the device must be maintained.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see "
Technical specification ",
Page 40, "Ambient conditions"). Protect the device against dust, humidity and heat.
Operating positi
on
You can use the de
vice in a vertical or horizontal operating position.
With the aid of s
uitable feet, it is possible to use the device in a vertical operating position
(see "
Vertical
operating position with feet (optional)", Page 1 5).
14 Fujitsu
To Next Page
Loading...
Need help?
General