Switching on for the first time: insta
lling the sof tw are
Switchingonforthefirst time:
installing the software
Installing,Software,Installing,
Once the installation ha s been started the device m ust not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the device is integrated into a network, the user and server de tails as well as
the network protoco l are required during the software installation.
Contact your network ad ministrator if y ou have any questions abou t these s ettings.
When you switch on the device for the first time, the supplied software
is installed and configured. Plan a reasonable amount of time for this,
as this process m ust not be interrupted.
Switch on the monitor and the m achine
► Switch on the monitor (see operating instructions for the monitor).
1
► Press the ON/OFF switch (1) on the
front of the device.
The operational display will light up
and the machine will start.
Fujitsu 27
To Next Page
Loading...
Need help?
General