Connecting external devices
Connecting the keyboard
You can connect a USB keyboard or a PS/2 keyboard to your device.
Keyboard,Connecting,
Connecting a USB keyboard
Use the supplied keyboard cable only.
USBport,Connecting,
► Plug the fla t rectan gular US B connector of the keyboard cable into a USB port of the device.
USBport
Connecting a PS/2 keyboard
Use the supplied keyboard cable only.
ConnectingaPS/2keyboardConnecting,
The PS/2 keyboard is only detected by the device if you connect the keyboard
when the device is sw itched off and then switch the d evice on again.
► Switch your device off.
► Plug the round plug o
f the keyboard cable into a k eyboard port of the device.
Keyboard,
► Switch your device on again.
Connecting external devices to the serial interface
SerialinterfaceSerialinterface,Externaldevices,Devices,
For an exact desc
ription of how to connect external devices to the corresponding
port, please se
e the external device documentation.
External devices can be connected to the serial port.
► Connect the data cable to the external device.
► Connect the data cable to the corresponding serial interface.
Port settings
Serialinterface,
You can c ha
nge the settings of the port in the BIOS Setup.
Device d
rivers
Devicedrive rs,
The devices connected to the serial interface r equire drivers. Your operating system
already includes m an y drivers. If the required drive is missing, install it. The latest
drivers are usually available on the Internet or will be supplied on a data carrier.
Fujitsu 23
To Next Page
Loading...
Need help?
General