Operation
Operation
Switch the device on
► If necessary, switch the monitor on (see the operating manual for the monitor).
DeviceMonitor
► Press the ON/ OFF switch on t
he front of the device.
The power indicator glows and the device is started.
Switching off the device
Switching the device o
ff does not disconnect it from the mains voltage. To completely
disconnect the mains
voltage, remove the power plug from the power socket.
► Shut down the opera ting system in the proper way.
DeviceMonitor
The devices switches to power saving mode automatically and switches off.
Procedureinane
mergency
If the device cannot be switched off, you can force a shutdown by
using the following emergency procedure.
Warning, this could lead to a loss of data!
► Press the ON/OF F switch for at least 4 seconds.
The device will switch off.
When you next restart the device, error messages may be displayed
due to the improper shutdown.
Settings
in BIOS Setup
BIOSSetup,Systems ettings,BIOSSetup,BIOSSetup,BIOSSetupSetup,
In the BIOS Setup, you can set system functions and the hardware c onfiguration of the
device. At delivery, the default entries are effective (see BIOS manual or mainboard
manual). You ca n customize these settings in the BIOS Setup.
Fujitsu 29
To Next Page
Loading...
Need help?
General