Preface
Fujitsu would like to thank you for purchasing the FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 (herein-
after referred to as ETERNUS AF).
The ETERNUS AF
is designed to be connected to Fujitsu servers (Fujitsu SPARC Servers, PRIMEQUEST, PRIMERGY,
and other servers) or non-Fujitsu servers.
This manual provides the system design information for the ETERNUS AF storage systems.
This manual is intended for use of the ETERNUS AF in regions other than Japan.
This manual applies to the latest controller firmware version.
Ninth Edition
November 2019
11
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Design Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1822-09ENZ0
To Next Page
Loading...
