Fujitsu ETERNUS AF250 S2 - Figure 93 Connection Example with a Dedicated Remote Support Port

■
Connection Configurations
For the ETERNUS AF
, two IP addresses are required (one IP address for the MNT port and one IP address for the
RMT port).
Figure 93 Connection Example with a Dedicated Remote Support Port
Different LANs are used for MNT ports and RMT ports.
Syslog server
LAN switch
ETERNUS AF
Remote support
cent
er
Controller enclosure
RMT
CM#0
RMT
CM#1
Router
IP address C IP address A
MNT MNT
Administration
terminal
SNMP
manager
E-mail server NTP server
Authentication
server
LAN for operation management
2. Connection Configuration
LAN Connection
139
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Design Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1822-09ENZ0