EasyManua.ls Logo

Fujitsu ETERNUS AF250 S2 - Table 9 Deduplication;Compression Function Specifications

Fujitsu ETERNUS AF250 S2
171 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The following table provides the function specifications for the Deduplication/Compression.
Table 9 Deduplication/Compression Function Specifications
Model ETERNUS AF250 S2/AF250
Number of TPPs available for Deduplication/Compression set-
tings
4
The maximum logical capacity
that can be a deduplication/
compression target (*1)
When one pool has one RAID
group
Up to five times the DEDUP_SYS Volume (*2)
When one pool has two or
more RAID groups
Up to ten times the DEDUP_SYS Volume (*2)
Logical capacity of the DEDUP_SYS Volume (*3) 8TB (default) to 128TB (maximum)
Logical capacity of the DEDUP_MAP Volume (*3) Fixed (5,641,339MB)
Volume type TPV
¡
Standard / FTV / WSV / SDV /
SDPV / VVOL / ODX
´
*1: To perform an efficient load balance of the Deduplication/Compression process, configuring two or more
RAID groups per pool is recommended.
*2: If a Deduplication/Compression Volume is created or expanded, expand the DEDUP_SYS Volume according
to the total capacity of the Deduplication/Compression Volumes. If the efficiency of the Deduplication/
Compression function cannot be estimated, the recommended total capacity of Deduplication/Compression
Volumes is a capacity smaller than the logical capacity of the DEDUP_SYS Volume.
*3: The Deduplication/Compression function can create Deduplication/Compression Volumes whose capacity is
equal to or larger than a DEDUP_SYS Volume. In environments where deduplication/compression is not ef-
fective, a write operation to the Deduplication/Compression Volume may fail due to a capacity shortage of
the DEDUP_SYS Volume.
In addition, if the DEDUP_SYS Volume capacity runs out or is close to running out, an SNMP Trap is sent.
Performance When Using the Deduplication/Compression Function
The ETERNUS AF performs data deduplication/compression in synchronization with the I/O from the server.
Using this function in environments where random access occurs is recommended. Data is intermittently stor-
ed in Deduplication/Compression Volumes because data is appended.
I/O response may significantly degrade when compared to systems that do not use the Deduplication/
Compression function.
Using this function in environments where the I/O size is 32KB or smaller is recommended. The performance is
affected in environments where the I/O size is large because data is deduplicated and compressed every 4KB.
If the I/O size or the boundaries of the I/O address are not 4KB, the performance is affected because the parts
less than 4KB are read in the ETERNUS AF.
If I/Os are issued to the Deduplication/Compression Volumes, the CPU usage rate increases. The performance
of non-Deduplication/Compression Volumes may also be affected.
1. Function
Operations Optimization (Deduplication/Compression and Storage Virtualization)
40
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Design Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1822-09ENZ0

Table of Contents

Other manuals for Fujitsu ETERNUS AF250 S2

Related product manuals