Fujitsu ETERNUS AF250 S2 - Figure 109 Drive Combination 3

■
Double Striping Configuration with Distributed Parity
RAID5+0(2D+1P) ´2 is used in the following examples to explain how to install drives that are configured for
double striping with distributed parity.
The drive number is determined by the DE-ID of the enclosure and the slot number in which the drive is instal-
led. Drives are divided into two redundant set groups in ascending order of drive numbers.
Example 3: Drives are installed in two different enclosures
Figure 109 Drive Combination 3
CE
A D B
DE
E C F
:
Redundancy Group 1
:
Redundancy Group 2
3. Hardware Configurations
Recommended RAID Group Configurations
159
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Design Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1822-09ENZ0