1 Click the [Next >>] button in the [Initial Setup] screen.
The [Set Storage System Name] screen appears.
2 ETERNUS DX name setup
Set the name of the ETERNUS DX as well as other information.
The information that is set here is used for network management by SNMP. The name of the ETER-
NUS DX is displayed in the login and operation screens of ETERNUS Web GUI.
(1) Set the required items and click the [Next >>] button.
A confirmation screen appears.
Chapter 3
General Settings
3.3 Storage Management (Initial Setup 1)
41
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0
To Next Page
Loading...
