Fujitsu Eternus DX600 S3 - Page 42

(2) Click the [OK] button.
The name of the ETERNUS DX is set and the setting completion screen appears.
(3) Click the [Done] button.
The [Change User Password] screen appears.
3 Changing user passwords
Change the user password.
(1) Set the required items and click the [Next >>] button.
A confirmation screen appears.
(2) Click the [OK] button.
The password is changed and the change completion screen appears.
(3) Click the [Done] button.
The [Set Thin Provisioning] screen appears.
4 Thin Provisioning setup
Enable or disable the Thin Provisioning function and set the maximum pool capacity.
Chapter 3
General Settings
3.3 Storage Management (Initial Setup 1)
42
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0