EasyManua.ls Logo

Fujitsu Eternus DX80 S2 - Page 108

Fujitsu Eternus DX80 S2
186 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A Event Notification Message List
A.1 Message Format
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0
108
Specific Trap (extended Trap)
Trap notification format
The notification format of SNMPv1, SNMPv2c and SNMPv3 are shown below.
Generic Trap (standard Trap)
SNMPv1
SNMPv2c and SNMPv3
Trap No. Name Description
2 fjdarye100ItemFault This Trap is sent to notify that a component fails or
degrades.
5 fjdarye100ItemWarning This Trap is sent to notify that a component requires
preventive maintenance.
6 fjdarye100SensorStatusChange This Trap is sent to notify that a temperature error is
detected.
7 fjdarye100MaintenanceRequired This Trap is sent to notify that an event requires
maintenance or preventive maintenance.
9 fjdarye100Information This Trap is sent to notify Information-level events.
10 fjdarye100CaPortLinkStatusChange This trap is sent to notify that the link status of a CA
port is changed.
22 fjdarye100ItemFaultToNormal This Trap is sent to notify that an event notified by
Trap No. 2 returns to normal status.
25 fjdarye100ItemWarningToNormal This Trap is sent to notify that an event notified by
Trap No. 5 returns to normal status.
26 fjdarye100SensorStatusChangeToNormal This Trap is sent to notify that an event notified by
Trap No. 6 returns to normal status.
Trap type enterprise agent-address
generic
- trap
specific
- trap
time-stamp
variable-
bindings
coldStart 1.3.6.1.6.3.1.1.5 The IP address
of the Master
CM for the port
(MNT or RMT)
that is specified
in the SNMP
Agent
environment
setting.
00The operation
time of the
SNMP Agent
(centiseconds)
The operation
time is reset
when the SNMP
Agent starts or
restarts.
N/A
authenticationFailure 4 N/A
Trap type
variable-bindings
Information [1]:sysUpTime
Information
[2]:snmpTrapOID
Information [3] or later
coldStart The operation time of the SNMP
Agent (centiseconds)
The operation time is reset when
the SNMP Agent starts or restarts.
1.3.6.1.6.3.1.1.5.1 N/A
authenticationFailure 1.3.6.1.6.3.1.1.5.5 N/A

Table of Contents

Other manuals for Fujitsu Eternus DX80 S2

Related product manuals