ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0
154
Appendix B
Audit Log List
This appendix describes the audit logs that are notified to a syslog server when this function is enabled in the
audit log settings of ETERNUS Web GUI or ETERNUS CLI.
■ Audit Log Format
The following formats are available for audit log: "RFC3164" and "RFC5424". The notification format is
specified in ETERNUS Web GUI or ETERNUS CLI.
This section describes examples of audit logs and the details of formats that are output.
● Output example of an audit log
The number under each underline indicates an item in the table below. A description is provided for each
item.
- "RFC3164" format
- "RFC5424" format
● Description of each audit log item
No. Item Description
1 Priority Priority of the message is output in the following format:
<
Priority
>
Priority value indicates the facility and severity of the message.
The Priority value is calculated by "Facility value × 8 + Severity value".
• Facility value for messages is always "13".
• Severity value for messages is always "6".
"110" is output as a priority value for an audit log.
For the "RFC3164" format, the HEADER part follows the priority part.
For the "RFC5424" format, "1" and then a blank follow the priority part.
Create RAID Group., [No=4 Name=RLU#1 Level=RAID1 Disk=0000,0001 CM=cm0cpu0]
1, ETERNUS#1, 0, 123, 02010001, Success, , root, Admin, GUI, 192.168.0.10,
<110>Apr 1 11:26:08 192.168.0.20 Storage: 01, 4, 1, 2012-04-01 11:26:08 +09:00,
20 21
9101112 13 1415161718 19
12 3 4567
8
2012-04-01 11:26:08 +09:00, 1, ETERNUS#1, 0, 123, 02010001, Success, , root,
<110>1 2012-04-01T11:26:08+09:00 192.168.0.20 Storage 01 4 - 1,
Admin, GUI, 192.168.0.10, Create RAID Group., [No=4 Name=RLU#1 Level=RAID1
Disk=0000,0001 CM=cm0cpu0]
20 211917 18
21
9810111213141516
12 34567
To Next Page
Loading...
