Fujitsu Eternus DX80 S2 - Default Chapter; About this Manual

ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0
4
About this Manual
Organization
This document is composed of the following seven chapters and three appendices:
● Chapter 1 Components
This chapter describes the components of the ETERNUS DX80 S2/DX90 S2 Disk storage system.
● Chapter 2 Basic Operation
This chapter explains how to turn on and off the ETERNUS DX80 S2/DX90 S2 Disk storage system and how
to operate the FUNCTION button on the controller enclosure.
● Chapter 3 Setup
This chapter describes the required settings for operation of the ETERNUS DX80 S2/DX90 S2 Disk storage
system and provides notes for setting up each function of the ETERNUS DX80 S2/DX90 S2 Disk storage
system.
● Chapter 4 Operations
This chapter describes the control of the LAN for operation management of the ETERNUS DX80 S2/DX90 S2
Disk storage system, and the monitoring the status of the ETERNUS DX80 S2/DX90 S2 Disk storage system.
● Chapter 5 Maintaining Optional Products
This chapter explains how to install optional products in the ETERNUS DX80 S2/DX90 S2 Disk storage
system.
● Chapter 6 Maintenance
This chapter describes maintenance for the ETERNUS DX80 S2/DX90 S2 Disk storage system.
● Chapter 7 Troubleshooting
This chapter explains troubleshooting when errors occur in the ETERNUS DX80 S2/DX90 S2 Disk storage
system.
"Event Notification Message List"
, "Audit Log List", and "Event (SNMP Trap) Display When Using ServerView
Operation Manager" are described as appendices.