Fujitsu Eternus DX80 S2 - Figure 1.23 Drive Slot Numbers (2.5 Type Drive Enclosure); Figure 1.24 3.5 Drive; Figure 1.25 Drive Slot Numbers (3.5 Type Drive Enclosure); Table 1.6 Status and Meanings of each LED (Drive)

To Next Page

To Previous Page

Chapter 1 Components

1.2 Drive Enclosures

ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-

Figure 1.23 shows the slot number of each drive.

Figure 1.23 Drive slot numbers (2.5" type drive enclosure)

● 3.5" drives

Figure 1.24 3.5" drive

Figure 1.25 shows the slot number of each drive.

Figure 1.25 Drive slot numbers (3.5" type drive enclosure)

● Part explanation

• LEDs

The states of LEDs are listed below.

Table 1.6 Status and meanings of each LED (drive)

LED name LED status Drive status

DRIVE READY

(green)

The drive is in normal status.

(blinks green)

DRIVE FAULT

(amber)

• The drive is in error status.

• In response to commands from ETERNUS CLI, the location of

the drive is identified.

Slot#8

Slot#9

Slot#10

Slot#11

Slot#12

Slot#13

Slot#14

Slot#15

Slot#0

Slot#1

Slot#2

Slot#3

Slot#4

Slot#5

Slot#6

Slot#7

Slot#16

Slot#17

Slot#18

Slot#19

Slot#20

Slot#21

Slot#22

Slot#23

DRIVE READY LED

DRIVE FAULT LED