Fujitsu Eternus DX80 S2 - Page 136

Appendix A Event Notification Message List
A.2 Message List
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0
136
J 11 SSMM 0 p 51100 MM 0 p 0CA Slot# S - V ( zz ) (on CM# m ) Port# P Warning
<
pppppppppppp ssssssssss rrrrr >
These messages are
notified when "Parts
Warning" is enabled
for Warning Level in
the event notification
setting.
They are not notified
during maintenance
operations.
CA port error is detected.
SS : Component subtype
MM : CA module ID (40 – 7F)
p: Device port number (0 – 1)
S : CA slot number (0 – 1)
V : Device number (0 – 1)
zz: CA type
m : CM number (0 – 1)
P : Port number (0 – 1)
pp... : Component number
ss... : Serial number
rr... : Version
J 21
SSMM 00 5 2100 MM 00 0 Controller Module# m ( zz ) FPGA Warning
<
pppppppppppp ssssssssss rrrrr >
CA FPGA error is detected.
SS : Component subtype
MM : CM module ID (10 – 11)
m : CM number (0 – 1)
zz : Model name (DX80S2 or DX90S2)
pp... : Component number
ss... : Serial number
rr... : Version
J 22
SSMM 0 p 52200 MM 0 p 0 Controller Module# m ( zz ) LAN PORT# p Warning
<
pppppppppppp ssssssssss rrrrr >
CM LAN port error is detected.
SS : Component subtype
MM : CM module ID (10 – 11)
m : CM number (0 – 1)
zz : Model name (DX80S2 or DX90S2)
p : Port number (0 – 1)
pp... : Component number
ss... : Serial number
rr... : Version
J 7A000000 6 7A000000 1 CE Exhaust temperature Warning These messages are
notified when "Tem-
perature Warning" is
enabled for Warning
Level in the event
notification setting.
They are not notified
during maintenance
operations.
CE exhaust temperature error (Warning) is
detected.
J 7B000000 6 7B000000 1 CE Intake temperature Warning
CE intake temperature error (Warning) is detected.
Event type
code
SNMP Trap Upper: Message
Remarks
Trap
No.
TrapItemID (*1) Lower: Description