Chapter 5 Maintaining Optional Products
5.4 Installing Long Wave SFP+ Modules (16Gbit/s)
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0
90
6 Remove the Short wave SFP+ module (16Gbit/s).
6-1 Pull down the Short wave SFP+ module (16Gbit/s) lever.
6-2 Pull the Short wave SFP+ module (16Gbit/s) straight out of the port cage.
7 Install the Long wave SFP+ module (16Gbit/s).
7-1 Remove the connector cover that is attached to the Long wave SFP+ module (16Gbit/s) port and pull
down the lever.
Make sure to store the removed Short wave SFP+ module (16Gbit/s) with the fixing lever and the
connector cover attached.
Keep the removed connector cover in a safe place where they will not be lost.
To Next Page
Loading...
