Fujitsu fi-5900C

150
6.3 Troubleshooting
(*) Refer to “4.5 Cleaning the Transport path and the sensors” on page 118.
NO
YES
Do the lines appear always on the
same location?
Do the lines disappear when scanning
with a lower resolution?
Symptom 7
Vertical lines appear in the scanned image.
Clean the glass surface inside
the ADF. (*)
Set the resolution to a lower
value and scan the document
again.
If the problem can not be resolved with this flowchart, refer to
"6.4 Before Contacting a Service Provider."
After checking the items given in section 6.4, contact an authorized
FUJITSU scanner service provider or your dealer.
YES
NO