108
4.1 Cleaning Materials and Areas Requiring Cleaning
4.1 Cleaning Materials and Areas
Requiring Cleaning
■ Cleaning materials
*1)For the purchase of the cleaning material, contact the FUJITSU scanner dealer where you
purchased the scanner.
*2)It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the
scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off
the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the
cleaned parts.
*3)Do not clean the rubber rollers with the cleaner F2, since doing so may cause the rollers to
deform or getting damaged.
*4)Pre-moistened with Cleaner F1, Cleaning wipes are used instead of moistened cloths.
*5)Any lint-free cloth can be used.
Cleaning materials Part No. Remarks
Cleaning sheet CA99501-0016 (*1) 20 sheets/pack
Cleaner F1 PA03950-0352 (*1)(*2) 1 bottle, 100ml/bottle
Moisten cloth with this fluid
and wipe the scanner to clean.
Cleaner F2 PA03950-0353 (*1) (*3) 1 bottle, 80ml/bottle
Cotton swab Commercially
available
Cleaning Wipe PA03950-0419 (*1) (*4) 24 sheets/pack
Lint-free dry cloth Commercially
available (*5)
To Next Page
Loading...
