Copyright 2011
FP-1000 Installation Guide-2 1.1.0.0
12 of 57
(5) Specify the interface you are using.
* If using the printer via a LAN interface connection, select a temporary port at this time.
– FUJITSU ISOTEC LIMITED
(6) Confirm that the displayed port number is correct and then click [Install] to start the installation.
(Using the default port number is recommended.)
* The following example is for a USB connection.
If th
e screen shown below appears, follow the instructions.
For Windows XP/Windows Server2003/WEPOS/WEPOS2009
Click [Co
ntinue Anyway].
For Windows 7/Windows Vista/Windows Server 2008
Click [In
stall this driver software anyway].
To Next Page
Loading...
