Ports and operating elements
Radio components:
UMTS (optional)/wireless LAN/Bluetooth
Wireless LANBluetoothUMTS
The installation of a wireless LAN
, Bluetooth or UMTS module not approved by Fujitsu
Technology Solutions GmbH will vo
id the approvals (CE!, FCC) issu ed for this device.
The modules for radio componen ts
are switched off during shipping.
Switching the radio components o n and off
► Slide the ON/OF F switch into the "ON"
position to activa te the radio components.
Wireless LANWirelessLANBluetoothBluetooth
or
► Slide the ON/OFF switch to the
"OFF" position to deactivate the
radio components.
If you s witch off the radio components, the Bluetooth and UMTS modules are powered
off and the wire less LAN transmission unit (antenna) is switched off.
The Wireless Selector enables you to switch the various radio components on and off.
You can a lso deact ivate the radio components individually in the BIOS setup.
You must have assigned a supervisor password in order for this function to be available.
Pay attention to the additional safety notes for devices with radio
components provided in the "Safety" manual.
Details on using Wireless LAN can be foun d in the online help system
included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS from your service provider.
20 A26391-K272-Z220-1-7619, edition 1
To Next Page
Loading...
