Removing and installing components
during servicing
Installing the hard disk
When installing the hard disk, ensure that the contacts in the hard disk
compartment do not ge t bent or become damaged.
Harddisk
2
1
3
3
► Insert the hard disk in the direction of the
arrow (1) into the hard disk compartment.
► Slidetheharddiskinastrai
ght line (2) to
the right so that the contact
s engage.
► Secure the hard disk with the screws (3).
► Fasten the cover (see Chapter "
Attaching the cover", Page 25).
Attaching the cover
2
2
2
2
2
2
2
2
2
2
1
► Attach the cover in the direction
of the arrow (1).
► Fasten the cover with the screws.
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected previously.
A26391-K272-Z220-1 -7619 , edition 1 25
To Next Page
Loading...
