What does 'Previous boot incomplete - Default configuration used' mean on Fujitsu lifebook e746?
If you see the message 'Previous boot incomplete - Default configuration used' on your Fujitsu Laptop, it means that due to an error during the previous system boot, default values were used for certain settings. Press the F1 function key when prompted to do so.
How to correct the date and time on a Fujitsu lifebook e746?
You can set the date and time on your Fujitsu Laptop using the BIOS-Setup-Utility in the main menu.
How to fix printer that doesn't print from Fujitsu lifebook e746?
If your printer is not printing from your Fujitsu Laptop, make sure that the printer is switched on and ready for operation. Check that the data cable connecting the notebook to the printer is properly connected. Ensure that the correct printer driver is loaded.
Why is the LCD screen difficult to read on my Fujitsu lifebook e746?
If the LCD screen on your Fujitsu Laptop is difficult to read, it may be due to reflected glare. Try turning the notebook or adjusting the tilt of the LCD screen. Alternatively, increase the brightness of the screen.
How to fix error messages on the Fujitsu Laptop screen?
If you are receiving error messages on the screen of your Fujitsu Laptop, switch the notebook off, then switch it back on. If using an external keyboard, check its connection and reboot the notebook, ensuring no key is pressed during startup. Check the additional memory module is correctly inserted. If the error message persists, check the hard disk settings in the BIOS Setup. If testing the extended memory results in an error, check whether the additional memory module has been inserted correctly. If the settings of the hard disk drive are incorrect, start the BIOS Setup (Primary Master submenu) and select the correct settings. Also, make sure that the operating system is installed on the corresponding drive.
What to do if Fujitsu Laptop stops working?
If your Fujitsu Laptop stops working, try these steps. If the notebook is in energy saving mode, exit that mode. If an application program has caused the malfunction, close the program or restart the notebook. If the battery is dead, charge it or insert a charged battery. You can also connect the AC adapter to the notebook.
What to do if Operating system not found on Fujitsu Laptop?
If your Fujitsu Laptop displays the message 'Operating system not found', check in the BIOS Setup whether your hard disk has been set correctly and ensure that the operating system is installed on the corresponding drive.
What to do if Fujitsu Laptop LCD screen remains blank?
If your Fujitsu Laptop screen remains blank, try pressing a key or touching the touchpad. If you have an external monitor or television connected, press the key combination to switch the screen output.
What to do if the notebook’s LCD screen remains blank on Fujitsu lifebook e746?
If the LCD screen of your Fujitsu Laptop remains blank, press a key or touch the touchpad to see if the monitor is switched off. If you have an external monitor or television set connected, press the key combination to switch the screen output.
What to do if external monitor is blank or the image is unstable on Fujitsu lifebook e746 Laptop?
If the external monitor is blank or the image is unstable on your Fujitsu Laptop, terminate the application program in Windows by pressing Alt + F4. Set the screen resolution as described in the documentation for your operating system. Select monitor 1 or 2 as described in the documentation for your operating system.
Identifies and explains the ports and controls located on the front of the notebook.
General safety precautions to follow when operating and handling the notebook.
Specific safety guidelines for using integrated wireless LAN and Bluetooth devices.
Steps for safely unpacking the notebook and checking for any transit damage.
Recommendations for choosing a suitable, safe, and ventilated location for device setup.
Instructions on how to correctly connect the AC adapter to power the notebook.
Guide to powering on the notebook for the initial setup and installation process.
Explanation of the various LED indicators and their meanings for system status.
Procedure for powering on the notebook correctly.
Instructions for properly shutting down the notebook to prevent data loss.
Overview of the notebook keyboard layout and key functions.
Guidelines for proper battery charging, maintenance, and storage to maximize lifespan.
Step-by-step instructions for safely removing and installing the notebook battery.
Step-by-step guide for docking the notebook to the port replicator.
Procedure for safely undocking the notebook from the port replicator.
Guidance on setting up BIOS passwords for enhanced system security.
Detailed steps for setting supervisor and user HDD passwords in BIOS.
Instructions for removing existing BIOS supervisor and user HDD passwords.
How to configure password prompts during system startup.
General precautions and safety notes for handling internal components and ESD sensitive devices.
Steps to take before starting any component removal or installation procedure.
Detailed instructions for adding or removing RAM modules.
How to access and start the BIOS Setup Utility program.
Guide to navigating and making changes within the BIOS Setup Utility interface.
Options for saving changes, discarding them, or loading defaults before exiting BIOS.
Procedure to save all BIOS changes and shut down the notebook.
What to do when encountering a problem that cannot be resolved independently.
Steps to diagnose and resolve issues preventing the notebook from starting up.
Solutions for when the notebook unexpectedly stops functioning or freezes.
Overview of procedures for backing up and recovering system images for Windows 7 and 10.
Steps to recover the system when the hard drive is still accessible.
Guide to creating a bootable USB recovery drive for troubleshooting Windows 10.
Overview of available recovery options for Windows 10, such as system restore or PC reset.
Instructions on how to reset the PC, keeping or removing personal files.
Steps to reinstall Windows using a previously created recovery drive.
Guide to reinstalling Windows using external installation media.
General| Bus type | OPI |
|---|---|
| Stepping | D1 |
| Tjunction | 100 °C |
| Processor cache | 4 MB |
| Processor cores | 2 |
| Processor model | i7-6500U |
| System bus rate | 4 GT/s |
| Processor family | Intel® Core™ i7 |
| Processor series | Intel Core i7-6500 Mobile series |
| Processor socket | LGA 1356 (Socket B2) |
| Processor threads | 4 |
| Processor codename | Skylake |
| Configurable TDP-up | 25 W |
| Processor frequency | 2.5 GHz |
| Processor cache type | Smart Cache |
| Configurable TDP-down | 7.5 W |
| Processor lithography | 14 nm |
| Processor manufacturer | Intel |
| Processor front side bus | - MHz |
| PCI Express slots version | 3.0 |
| Processor boost frequency | 3.1 GHz |
| Processor operating modes | 64-bit |
| ECC supported by processor | No |
| PCI Express configurations | 1x4, 4x1 |
| Thermal Design Power (TDP) | 15 W |
| Configurable TDP-up frequency | 2.6 GHz |
| Configurable TDP-down frequency | 0.8 GHz |
| Maximum number of PCI Express lanes | 12 |
| On-board graphics card | Yes |
| On-board graphics card ID | 1916 |
| Discrete graphics card model | Not available |
| On-board graphics card model | Intel® HD Graphics 520 |
| Maximum on-board graphics card memory | 1.74 GB |
| On-board graphics card OpenGL version | 4.4 |
| On-board graphics card base frequency | 300 MHz |
| On-board graphics card DirectX version | 12.0 |
| On-board graphics card dynamic frequency (max) | 1050 MHz |
| Form factor | Clamshell |
| Product type | Laptop |
| Product color | Gray |
| Memory slots | 2x SO-DIMM |
| Internal memory | 8 GB |
| Memory clock speed | 2133 MHz |
| Memory form factor | SO-DIMM |
| Internal memory type | DDR4-SDRAM |
| Maximum internal memory | 32 GB |
| Memory layout (slots x size) | 1 x 8 GB |
| SSD capacity | The Solid State Drive's storage capacity in Gigabytes. |
| SSD interface | SATA III |
| Storage media | SSD |
| SSD form factor | 2.5\ |
| Total storage capacity | 512 GB |
| Compatible memory cards | SD, SDHC, SDXC |
| Number of SSDs installed | 1 |
| Display surface | Matt |
| Display diagonal | 14 \ |
| Display brightness | 300 cd/m² |
| Contrast ratio (typical) | 700:1 |
| Audio chip | Realtek ALC255 |
| 4G standard | LTE |
| 3G standards | UMTS |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Bluetooth version | 4.1 |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Mobile network generation | 4G |
| Charging port type | DC-in jack |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 3 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-C ports quantity | 0 |
| Pointing device | Touchpad |
| Battery capacity | 72 Wh |
| Battery life (max) | 14 h |
| Number of battery cells | 6 |
| AC adapter power | 65 W |
| AC adapter frequency | 50 - 60 Hz |
| AC adapter input voltage | 100 - 240 V |
| AC adapter output current | 3.42 A |
| AC adapter output voltage | 19 V |
| Cable lock slot type | Kensington |
| Password protection type | BIOS, HDD, Supervisor, User |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Sustainability certificates | RoHS, EPEAT Gold, ENERGY STAR |
| Certification | CE, CB, WEEE, Microsoft Operating Systems (HCT / HCL entry / WHQL) |
| Processor code | SR2EZ |
| Processor ARK ID | 88194 |
| Processor package size | 42 X 24 mm |
| Supported instruction sets | SSE4.1, SSE4.2, AVX 2.0 |
| Intel Secure Key Technology version | 1.00 |
| Intel Stable Image Platform Program (SIPP) version | 0.00 |
Weight and Dimensions| Depth | 231 mm |
|---|---|
| Width | 338 mm |
| Weight | 1700 g |
| Height (rear) | 27 mm |
| Height (front) | 20 mm |
To Next Page
