First-time setup of your device
Switching on the device for the fi rst time
Switchingonforthefirst time
On devices with ON /OFF sw itch for wireless components: Slide the ON/O F F switch
for wireless components to the ON position before switching on the device.
When you switch on the device for the first time, the supplied software is
installed and con figured. Because this proced ure must not b e interrupted,
you should set aside enough time for it to be fully comp leted and connect
the device to the mains using the mains a dapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use your de
vice for the first time, the operating system
is pre-in stalled on the hard
disk.
► Switch on your device.
► During insta llation, follow the instructions on screen.
If a Windows o perating system is installed on your device, you will find more
information on the system and drivers, help programmes, u pdates, manuals etc.
on the device or on the Internet at "
http://ts.fujitsu.com/suppor t".
Fujitsu Technology Solutions 17
To Next Page
Loading...
