Connecting external devices
Connecting an external monitor
The notebook itself does not have a DVI port. The optional Port Replicator
available for your notebook provides this port.
An analogue monitor is connected to the analogue VG A monitor po rt, a digital monitor to
the DVI monitor port. Screen output is limited to a maximum of two screens at any one
time (see "
Key comb ination s", Page 24, section "Toggle output screen").
MonitorVGA connection socketScreenportMonitorport
Digital DVI monitor port
Analogue VGA monitor port
► Switch off the notebook
and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the exter
nal monitor and then the notebook.
You can also switch back
and forth between the external m onitor and the notebook’s
LCD monitor, see chapte
r "
Key combinations", Page 24.
You can display the sam
e picture on the external monitor and the
notebook LCD screen si
multaneously.
Fujitsu Technology Solutions 55
To Next Page
Loading...
