Working with the notebook
Removing the card
Always remove the card accord ing to the rules described below, to
ensure that none of your d ata is lost.
You can stop the card using the corre spon ding icon in the task bar:
► Left click on the icon to safely remove hardware, located in the taskbar.
► Select the card you want to stop
and remove.
► Press the "Enter" key.
Wait for the dialog box wh ich tel
ls you that it is now safe to remove the card.
1
2
► If the eject button is lowered, you m ust
first cause the eject button to release
from the notebook casing. To do this,
press the eject button until it pops out.
Press the eject button (1) so that the card
protrudes a little fro m the notebook.
► Pull the card out of the slot (
2).
► Insert the card placeho
lder into the
slot guide.
► Carefully slide the placeholder for the
cardasfarasitwillgointotheslot.
Do not use excessive force.
Loudspeakers and microphones
MicrophoneLoudspeakersB assloudspeak er (subwoofer)Volume cont rol
Information on the exa ct position of the speakers and microphone can be
found in "
Ports and controls " , Page 9.
Please refer to chapte r "
Key co mbinations", Page 24 for information on setting the volume
and also enabling/disa bling the loudspeakers using key combinations.
If you attach an external microphone, the built-in microphone is disabled.
When you conne ct headphones or ext ernal speakers, the built-in speakers are d isabled.
Information on connecting headphones and a microphone can be found
in "
Connecting external devices", Page 54.
Fujitsu Technology Solutions 39
To Next Page
Loading...
