Working with the notebook
Wireless LAN / BlueTooth / UMTS (optional)
The installation of radio components not approved by Fujitsu Technology Solutions
will invalidate the certifications issued for this device.
Switching the wireless com
ponents on and off
Before switching on your device for the first time, the on/off switch for
wireless components m ust b e in the "ON" position.
► Slide the ON/OFF switch in
to the "ON"
position to a ctivate the w
ireless compo nents.
Wireless LANWireless LANBluetoothBluetooth
or
► Slide the ON/OF F switch to the
"OFF" position to d eactivate the
wireless components.
The Bluetooth and UMTS modules and the wireless LAN transmission unit (antenn a)
will also be switched off when you switch off the wireless components.
You can also deactivate the wireless components individually in the BIO S Setup.In
order to be able to do this, you will either nee d to know the supervisor password
if one has been assigned, or no password must have been assigned.
Please read the additional safety notes for devices with wireless
components in the "Safety" manual.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on how to use B luetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS from your service provider.
42 Fujitsu Technology S olutions
To Next Page
Loading...
