Working with the notebook
Adjust the fan control
You can adjust the fan control in the BIOS Setup Utility. The following settings are available:
• Normal: The system will be cooled so that the maximum system power is always available.
• Silent: The fan speed and thereby the fan noise will be reduced.
► Call up the BIOS S etu p Utility.
► In the menu Advanced - Miscellaneous Config ura tio ns selec t the function Fan Control.
► Select the setting Normal or Silent.
Calling up and using the BIOS Setup Utility is described in the section
"
Settings in BIOS Setup Utility", Page 59.
With the Fujitsu Utility Function Manager you can also switch between these two
settings under Windows. For this, in Function Manager select menu item Fan with
the selection options Quiet Mode (corresponds to Silent) and Normal Mode.
Memory cards
Slot
Your notebook is equipped with an integrated memory card reader.
Follow the manufacturer’s instructions when handling the memory cards.
Memorycard
Supported formats
Your notebook supports the following format:
• Secure Digital (SD
TM
Card)
Inserting the memory card
► Slide t he memory card into the slot until
you feel it engage. The label area must
be facing upward. Do no t apply any
force, otherwise the delicate contact
surfaces could be damaged.
Memorycard
Depending on the particular type
used, the memory card may protrude
slightly from the slot.
Fujitsu 37
To Next Page
Loading...
