Tro ubl eshooting and ti ps
The notebook d oes not start after switching it on
Notebook
Cause Troubleshooting
The battery is dead.
► Charge the battery.
or
► Connect the AC adapter to the notebook.
The AC adapter is not connected properly. ► Check whether the AC adapter is properly
connected to the notebook.
► Switch the notebook on.
The notebook stops w or
king
NotebookEnding
Cause Troubleshooting
The notebook is in en
ergy saving mo de.
► End energy saving mo
de.
An application pro
gram has caused the
malfunction.
► Close the application program or restart
the notebook (by restarting the ope rating
system or sw itching the device off and back
on again).
The battery is dead.
► Charge the battery.
or
► Connect the AC adapter to the notebook.
The printer does not print
Printerdoes
notprint
Cause Troubleshooting
The printer is not switched on. ► Make sure that the printer is switch ed
on and ready for operation (refer to the
documentation supplied with t he printer).
The printer is not connected correctly.
► Check that the d ata cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty o r not correctly
installed, or it is the wrong printer driver.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
Fujitsu 65